Water Heaters (Boiler) in Kenya
Boilers (Water heaters)
Boilers (water heaters) are devices installed in an apartment or house for heating water in the water supply system. They operate on gaseous, solid or liquid fuels, electricity or coolant. Depending on the principle of operation, flow and storage models are distinguished. The former heat the water while it passes through a special heat exchanger, the latter use a closed container with a heat source for this.
In places where it works intermittently or there is no hot water supply, a boiler is installed. Devices differ in the method of heating and the type of energy carrier. The Foxtrot catalog contains models of top brands with a guarantee. Store consultants will help you make a choice.
Devices differ in the method of heating and the energy carrier used.
According to the method of heating water, accumulative and flow models are distinguished. The first work on the principle of a heated thermos. When turned on, water accumulates and heats up in the Water Heaters (Boiler) in Kenya tank, after which the device maintains the set temperature. The liquid is supplied only when it has been accumulated in sufficient quantity and heated. The models have the following features:
Flowing water heaters pass a stream of cold liquid through themselves, and the heating element installed inside them - a heating element - instantly heats the water. Technology features:
Check with your consultants for the following:
The service life and quality of the equipment also depends on additional factors. Before buying, check the presence of a magnesium anode in the tank. It protects the heater from corrosion. Pay attention to its size - a small magnesium anode will not be able to do a good job.
If you choose a storage model, check if a safety valve is included in the package. It is needed to remove excess water.
Foxtrot managers will tell you how often to clean from scale and corrosion in order to keep the device working at a high level.
In order for the heating equipment to fit the tasks, you need to carefully approach the choice. We will focus on the main characteristics.
The heating element can be wet or dry. The first is made in the form of a curved spiral and is made of copper, a material with high thermal conductivity. The element comes into contact with water and heats up almost to its temperature. Consider these points:
Dry heating element is placed in a flask or casing and protected from contact with water. Due to the fact that there is no contact with water, the heater temperature is always higher than the water temperature. It is characterized by such features:
In Foxtrot you can buy a boiler with this installation method:
Compact boilers, designed for 6-30 liters, can also be installed under or above the sink. The difference lies in the location of the pipes. For models that are installed under the sink, the pipes go up. For appliances located above the sink, the inlet and outlet pipes go down.
https://jiji.co.ke/22-water-heaters
Comments
Post a Comment